7SS-20

Stainless Steel Clamp Collar to Secure Drum Cone to Drum Top. Fits 20-3/8″ (51.75 cm) drum rim outside diameter with drum lid removed.

Control dumping of DRY MATERIAL from a drum
|Replace your drum lid with a drum cone
|Greatly reduce dust when discharging dry material
|Extend the reach of pour
|Secure to drum with Clamp Collar
|Add Valve to start and stop dispensing (slide gate or iris valve with 6″ (15.24 cm) opening)
|Select correct drum cone size for each drum diameter
|Centered drum cones
|Asymmetric drum cones with off-center discharge
|Drum Cone capacity exceeds the capacity of all Morse drum handlers when properly secured to drum

Made of bead blast finished Type 304 Stainless Steel
|Clamp Collar secures Drum Cone to drum
|Fits 20-3/8″ (51.75 cm) drum rim outside diameter
|IMPORTANT: Remove drum lid. Then measure drum top rim outside diameter WITHOUT lid.
|Tighten Clamp Collar around top rim of drum with Cone in place
|Tighten Clamp Collar by turning knob on end of threaded rod
|On inside of Clamp Collar, sections of rod retain Cone, and sections of angle engage under top rim of drum

Lead Time: 20 Days