Parts and accessories to optimize your conveying operations.
Accessories and ancillary components are necessary for efficient conveyor processing.
We’ve got all parts needed to amplify your system including Supports, Gravity Butt Spurs, Product Stops, Butt End Stops, Pneumatic Brake Assemblies, Traffic Cops, Supports, and more.
Photo Eye Sensors, Inline Scanners, Print Labeling, Stretch Wrappers, Case Sealers, Case Strappers and more are available to reduce manual touches and increase productivity.
Gravity Roller Butt Spurs
Gravity galvanized roller butt spurs divert flow of goods at 30 ° or 45 °, right or left and 90 ° by simply adding a standard 45 ° curve to spur.
Pneumatic Product Stops – Medium Duty Pneumatic Roller And Blade Stops
Pneumatic gravity conveyor stops are used where automatic line control is required such as slug accumulation, indexing, etc. 24 hour shipments are available on some widths.
Manual Product Stops – Medium Duty Manual And Blade Stops
Manual operated gravity conveyor stops are hand operated and used where line control is required such as slug accumulation, indexing, workstations, etc. 24 hour shipments are available on some widths.
Angle And Roller Product Stops
Both angle and roller stops serve as an economical means to stopping goods at a given fixed point. ′′BR′′ brackets or angle stop quickly attaches to conveyor frame top flange. 24 hour shipments are available on some widths.
Butt End Product Stops
Butt end stops attach to end of conveyor frame into the butt couplings, providing a firm end-of-unit fixed stop. This stop is available in light, medium and heavy duty construction.
Pneumatic diverters are used to divert packages off main conveyor line onto spurs. This diverter may be utilized in powered or gravity conveyor applications.
Manual diverters are used to divert packages off of a main conveying line onto other conveyors. Diverter can be used on powered or gravity conveyors.
Manual gate assemblies are one of the most common conveyor accessories. Simple to install, manual gate assemblies offer passage to and from operator work cells as well as providing access for fork trucks, walkways, etc. Gates include hardware and conveyor section. Maximum weight of gate section must NOT exceed 75 lbs. If gate weight (i.e. conveyor section) exceeds 75 lbs., use spring loaded gate below.
Spring Loaded Gates
Spring loaded gate assemblies may be used to provide openings and walkways for operators, pedestrians or fork truck traffic or to simply make work areas in and around conveyors readily accessible. Tensioned springs offer increased lift capacity with minimal effort. Gates include hardware and conveyor section. If gate weight exceeds 150 lbs., consult factory.
Supports to meet all your structural, height, weight and environmental requirements for an industry.
Several different models of guard rail are available depending on your application.
Pneumatic Brake Assembly
Model PBA pneumatic brake assembly is used to automatically brake rollers for flow control and also for indexing when combined with pneumatic stop. Models available for medium duty applications and heavy duty use.
Traffic cops control merges allowing first carton striking an arm to pass. This action automatically locks the other arm in place until the first carton clears the arm.
When conveyors must be suspended from ceiling in overhead installation, ceiling hanger assemblies provide a comfortable fit. Rods are all-threaded to allow for ease of vertical adjustment at ANY elevation. 24 hour shipments available in some dimentions.