Intelligent Lifting Devices
Improve workflow efficiency and prevent employee injuries with a lifting system.
Intelligent Lifting Devices - the next evolution in lifting equipment
Need a solution that offers more programmability and customization than a traditional hoist? Check out G-Force and Easy Arm Intelligent Lifting Devices (ILDs), which enable operators to lift and maneuver naturally, as if the devices were an extension of their arms. Plus, they offer a combination of pinpoint precision and blazing speeds that traditional lifting devices can’t provide.
- Gorbel’s G-Force is a lift assist device that provides next-level ergonomic and gravity defying solutions for lifting.
- The Easy-Arm is an ergonomic lifting arm that pairs the G-force with an ergonomic articulating Jib to provide an all-around solution.
Gorbel Easy Arm and Intelligent Lifting Devices
There are two key features of ILDs that dramatically reduce damage to products and fragile parts:
- Virtual Limits – allows the operator to set slowdown points so that movement is automatically smooth and slow at the point of placement.
- Float Mode – with just ½ lb. of force on the load itself, operators can precisely orient loads throughout the full stroke range by manipulating the load with their hands.
G-Force Servo Powered Intelligent Assist Devices
G-Force technology fills the void between traditional lifting devices and completely automated robotic solutions. These devices use the human’s intelligence and adaptability for guidance, but the work is done by the device. G-Force is a technology that enables effortless, user-friendly heavy load manipulation, increasing manufacturing productivity speed by 70% and precision by 51% when compared to other lifting methods. By reducing wear on the worker and energy expenditure when compared to other lifting methods, the use of G-Force enables ergonomic lifting and a safer work environment for your people.
Gorbel’s G-Force Intelligent Lifting Devices use exclusive patented technology and an industrial processor-controlled servo drive system to deliver unmatched lifting precision and speed. Their fusion of advanced technology and basic human guidance maximize your productivity while minimizing the risk of injury to your operators.
The Q2 model is a feature packed base model. It offers the same speed and precision as the higher end iQ2 model.
Here are some key features of the G-Force Q2 model:
- 2 user configurable Inputs and 2 Outputs on the handle.This allows for more customization over a wide range of applications.
- Ability to set 3 sets of virtual limits for precise control
- Servo controlled processor system
- Tablet or computer-based Smart Connect user interface makes configuration a breeze. Three levels of password protected access so different user types have access to the configurations based on their needs.
- Built in wireless connectivity via Wi-Fi.This provides the ability to service and troubleshoot without the need for Ethernet or USB (though both are still provided as a standard)
- The handle and user interface are available in multiple languages – English, French, German, Italian, and Spanish
The G-Force® iQ2, an enhanced model of the G-Force Q2 model, offers even more configuration options with electrical control Input/Output (I/O) points at the handle and in the actuator. Here are some key features of the G-Force iQ2 model:
- Eight configurable inputs and outputs on the handle and 8 dedicated input and 4 output on actuator. This allows for more customization over a wide range of applications.
- Multiple sets of virtual limits for precise control
- Servo controlled processor system for precise control of angular or linear position, velocity, and acceleration
- Tablet or computer-based Smart Connect user interface makes configuration a breeze. Three levels of password protected access so different user types have access to configurations based on their needs.
- Built in wireless connectivity via Wi-Fi. This provides the ability to service and troubleshoot without the need for Ethernet or USB (though both are still provided as a standard)
- The handle and user interface are available in multiple languages – English, French, German, Italian, and Spanish
Easy Arm Intelligent Lift Devices
The Easy Arm Intelligent Lifting Arm is a combination of the G-Force lifting device and an articulating jib crane. It is an ideal solution if you are looking for a turnkey, plug and play lifting solution. You get all the strength, precision, and speed of the patented G-Force lifting technology and processor controlled electric servo drive system in the body of an ergonomic articulating jib crane. The Easy Arm offers the best of both worlds – the control necessary to finesse fragile parts AND speeds up to 4 times faster than traditional lifting devices.
There are two Easy Arm models to choose from: the Q2 and the iQ2. The Q2 model is a feature packed base model. It offers the same speed and precision as the higher end iQ2 model, with 2 user configurable inputs and outputs on the handle. Need more customization? The iQ2 model offers 8 configurable IO points on the handle plus 8 dedicated Input and 4 dedicated Output points at the actuator.
Free-Standing Easy Arm:
A solution for a smaller work area that requires 14’ spans or less, is easy to install and easy to relocate. Key features include:
- Free standing or portable mounting solutions that will allow you to move this lift assist device anywhere in your facility
- Fully Integrated with Q2 and IQ2 G-Force® Intelligent Lifting Devices
- For smaller work areas that require 14’ spans or less
- Easy installation: Unit ships assembled and ready to be installed
- Requires no special foundation for the 165 and 330. The 660 can be a foundationless installation up to 9′ 6″
- Easy relocation: The Easy Arm® is simply bolted to the floor
- Cost effective turnkey solution
Underhung Easy Arm:
When you need to cover multiple work cells, save valuable floor space, and require a hook height over 11’, the Underhung Easy Arm model is your best choice. Key features include:
- Fully Integrated with Q2 and IQ2 G-Force® Intelligent Lifting Devices
- Includes all the features and benefits of Gorbel’s G-Force® Technology
- Saves valuable floor space
- For hook heights over 11’
- Covers multiple work cells
- 165 lb. standard capacity. Contact W.W. Cannon to inquire about 330 lb. unit
While the initial cost is higher than investing in non-ILD technologies such as hoists and balancers, the increase in productivity and reduction in employee injuries and product damage make it well worth the investment. Read more about the ROI and ergonomic advantages of Intelligent Lifting Devices:
End-Effector Tooling:
Gorbel G-Force® and Easy Arm® Intelligent Lifting Devices are high speed, high precision, intelligent lifting devices that often require end tooling to complete a total solution that will grip, lift, move, lower and release a load allowing the full benefit of increased productivity, reduced product damage and superior ergonomics (like below-the-hook lifting devices for hoists).
Choosing the right end-effector tooling to complement your G-Force® and Easy Arm® is the key to maximizing your lifting solution. End-effector tooling engages the load so it can be lifted and manipulated in whatever way your application requires – whether the load needs to be flipped, turned, or rotated. Refer to the brochure titled “Gorbel G-Force Tooling” for examples of end-effector tooling solutions.
From design consultation to onsite project management and installation, W.W. Cannon can help you select an Intelligent Lifting Device that maximizes safety and optimizes employee productivity – and meets your budget needs and timeline. Did we mention that we have decades of experience navigating the permitting and code compliance process? Mismanagement of these issues can lead to project delays, emphasizing the importance of our expertise in handling them effectively. We also install and service everything we sell. Contact us today and let one of our experts help you configure the right intelligent lifting device for your application – on time and within your budget.
Preferred Suppliers
.
Schedule Your Consultation with Our Experts
W.W. Cannon’s Turnkey Service Solutions result in a strong return on your investment. Get in touch with one of our specialists today for a complimentary consultation. We’ll answer any questions you have and help you plan your next steps.